Plain Slice Cut American Walnut Wood Veneer With Competitive Prices
-
Veneer Cut: Slice Cut / Flat Cut
-
Grade: Panel A
-
Length: Panel≥250cm
-
Width ≥12 cm
-
Thickness: 0.45MM (other thickness could be customized)
-
Thickness Tolerance: +/-0.02MM
-
Moisture Content: 8-12%
-
Usage: Furniture, Fancy Plywood/MDF; Flooring,Door, Cabinet, Chest
TECHNIES SHEET:
| Wood Specie | American Walnut |
| Scientific Name | Juglans Nigra |
| Grade | A |
| Veneer Length | Panel≥250cm |
| Veneer Width | ≥12cm |
| Veneer Thickness | 0.45MM |
| Veneer Cut | Plain Cut |
| Usage | Furniture, Fancy Plywood/MDF; Flooring,Door, Cabinet, Chest |
| MOQ | 1000 Square Meters |
| Delivery Date | Within 7-30 days after deposit received |
| Payment Terms | T/T , L/C at sight, Western Union |
| OEM | Acceptable |
| Monthly Capacity | 500,000 Square Meters |
ABOUT AMERICAN WALNUT:
Processing suggestions and characteristics
Density
Walnut has a density of 37 pounds per cubic foot. Kiln-dried lumber weighs about 3 pounds per board foot. This density is in the middle of U.S. hardwood species.
Drying
Walnut dries without much defect, but must be dried slowly, especially thick stock, to avoid interior cracks, similar to honeycomb in oak. End coating is essential for thicker stock, and is recommended for thinner material as well.
Shrinkage from green to 6 percent MC for flatsawn lumber is approximately 6 percent.
Gluing and Machining
Walnut is very easy to glue. In fact, it is somewhat forgiving, if all variables are not quite perfect. Nevertheless, due to the high cost of walnut, all efforts should be made to assure that gluing defects never occur, meaning that surfaces should be flat, straight, and freshly prepared.
Machining properties are excellent. When sanded, a premium surface is easily obtained.
Stability
Once dried, walnut is extremely stable, although like all wood species, it will swell with gain of moisture and shrink with loss. Walnut’s shrinkage and swelling rate is lower than many other North American species, however. Further, due to its inherent straight grain, warping when the moisture changes is rare.
ABOUT US:
Lonson Veneer Co.Ltd focus on Producing and exporting wood veneers for 9 years. Our veneers include: Natural Wood Veneers, Fumed (smoked) Veneers, Rough Cut (smoked) Veneer, Dyed Veneers, Reconstituted Veneers. All sizes are available, wood flooring veneers, furniture size, door size, Panel size. Grades A; A/B; C; C/D, Monthly capacity 500,000 sqm. Until now, we already exported to Indonesia, Vietnam, Malaysia, India, Pakistan, Bangladesh, UAE, Philippines,Korea, etc more than 20 countries. Clients like our quality wood veneers and always repeat orders. You are welcome to inquire for any demands.
WHY US:
1, Experienced wood veneers manufacturer and exporter for 9+ years.
2, Various kinds wood veneers, including Natural wood veneer, Dying veneer, Fumed veneer, Rough Cut veneer, Recomposed veneer, etc.
3, Different sizes and grades are all available. Wood Flooring veneer, Furniture size, door size, panel size, thickness from 0.4-2mm.
4, Professional and Considerate Service.
5, Fast Delivery and Continuous Supply.
EXPORT PACKAGE:
FACTORY TOUR:
Product Tags:
|
|
MDF Plain Sliced Walnut Veneer 250cm Length Apply To Door Leaf Images
|
